Anticorrosive epoxy board material mainly consists of the following five parts: first, an epoxy resin, collectively, epoxy group-containing polymers, mainly for corrosive media is not too strong, alkali resistance more prominent, and ability General acids (except hydrofluoric acid) corrosion. Second, epoxy curing agents, there are amines, anhydrides, resin compounds and other major varieties, of which the most commonly used amines, which in turn can be divided into aliphatic amines, aromatic amines and amine-modified and other types. Third, a diluent, an epoxy resin is usually diluted with an inert diluent such as: ethanol, acetone, benzene, toluene, xylene and the like, according to the manufacturers understand Tianjin epoxy board, two kinds of non-reactive diluent can be mixed, sometimes To reduce the shrinkage of the cured product, is also used to reduce pores and cracks reactive diluent, such as butyl ether, ethylene oxide, propylene oxide, phenyl ethers, glycidyl ether. Four, plasticizers, toughening agents, brittle after curing epoxy alone, impact toughness, flexural strength and heat resistance is poor, common plasticizers, toughening agents to the resin to increase the plasticity and improve toughness, improved flexural strength and impact toughness. Fifth, the filler, powder, fine aggregate, coarse aggregate, collectively referred to as the glass flake filler added to the appropriate filler can reduce the cost of products, to improve their performance, the amount of glue in the filler resin is generally The amount of 20 to 40% (by weight), more of these may be added in an amount of putty formulating, and can be 2 to 4 times the amount of resin, quartz powder used as a powder, ceramic powder, in addition to graphite, diabase rock powder, talc, mica and the like. For details, please see our web site: http://www.tianhao0769.com